INSTALLATION GUIDE

Install Prepperpoint with Rufus.

Rufus is our recommended Windows tool for writing the Prepperpoint system image to a USB drive or external disk. Copying the image as an ordinary file is not enough.

WINDOWS + RUFUS

Five steps from image to bootable drive.

Get Rufus
  1. 01

    Download the files

    Download the Prepperpoint system image and compare its published SHA-256 checksum before continuing. Extract prepperpoint.img.zst using a tool that supports Zstandard (.zst). The resulting file should be prepperpoint.img.

  2. 02

    Connect the correct drive

    Connect the USB drive or external disk you want to use. Everything on the selected drive will be erased. Disconnect other external drives to reduce the risk of choosing the wrong one.

  3. 03

    Open Rufus

    Start Rufus in Windows, select the correct device under Device, then choose the downloaded Prepperpoint image under Boot selection.

  4. 04

    Write the image

    Check the device name and capacity one final time and select Start. Use any specific write mode stated in the release instructions. Do not interrupt the process or disconnect the drive while it is being written.

  5. 05

    Start Prepperpoint

    Safely eject the drive. Restart the computer and select the USB or external disk from the computer’s boot menu. From there, run Prepperpoint directly or install it on an internal drive.

Exact choices may be adjusted when the final release file is set. Always follow the information published with the version you download.

Rufus and help along the way

Download Rufus from its official website. Always check the target drive’s name and capacity: everything on it will be erased. Extract the .zst file first, then select prepperpoint.img as the image in Rufus.

The video is a general bootable-USB tutorial using an ISO. Prepperpoint’s image format and options may differ. Always follow the instructions for the current Prepperpoint release.

USB, SSD or mechanical hard drive?

For regular operation, we recommend a good-quality SSD. A mechanical hard drive can also be suitable, especially for large collections, but is more sensitive to knocks. USB flash drives are convenient for transport and reserves; typical flash drives are less suited to long-running operation and frequent writes. Lifespan depends on quality and use.

STORAGE CAPACITY

Choose capacity for the content you want to carry.

Installed content determines the requirement. Wikipedia, maps and personal collections can need far more space than the base system itself.

128 GB

Minimal use

Your own documents and core features, without Wikipedia and with no or very limited maps. Choose this only when you deliberately want a small installation.

256 GB

Practical minimum

The practical minimum for offline content such as Wikipedia and a limited selection of maps.

1 TB

Large collections

For extensive Wikipedia editions, more map areas and large personal document or media collections.

These capacities are planning recommendations. Exact requirements depend on the Wikipedia editions, maps, images, documents and other packages you select.

CHOOSE A STORAGE MEDIUM

USB works. SSD is better over time.

USB flash drive

Simple, compact and inexpensive. Good for testing and a reserve used less often. Ordinary flash drives often have lower write endurance and more variable quality than an SSD, so they are not the first choice for continuous use.

Mechanical hard drive

Can provide a lot of capacity at low cost and suits a more stationary installation. It has moving parts, is more sensitive to shocks and needs careful handling.

After first boot

The first boot may take up to 10 minutes while necessary resources are unpacked and prepared, depending on the computer and drive. Keep the computer powered on during this process. Then check that the portal opens and the local network works before storing the drive with your emergency equipment. Start it periodically and keep its content current.